| POWERSKI
DEALERS AND DISTRIBUTORS
RIDE THE IGNITER 330™!!
Last week PowerSki
International was visited by several Dealers
and DIstributors who spent the week
learning the ins and outs of the patented PowerSki
Jetboard™ Igniter 330™. This is
an excellent training opportunity for Dealers
and Distributors to get their
hands dirty and get into the mechanics
of servicing and proper maintenance for their
respective service centers. |
  
|
| |
| After a long and gruelling
week turning wrenches, tearing down
and rebuilding engines, assembling handles,
putting together electrical boxes, and making sure all the
seals in the Igniter 330™ are working
properly according to specifications... It was time to let
off a little steam and put their efforts to the test!
After all... they are first time riders. |
| |
|
It was really exciting to see their efforts
pay off with no problems at all. Not only
did they build the Igniter 330™...
but got to test it as well.
|
  
So when It came time
to Ignite their fiberglass rocketships
and "Ride the Endless Wave"™,
Jeb Berry made sure to give each
rider proper instructions on how
to ride the PowerSki Jetboard™ Igniter
330™. "It's all about
balance", Jeb points out...
"and remember... the throttle is your friend".
Jeb continues to explain the four count... 1
- Attach your kill switch teather. 2 - Push the primer
bulb one time. 3 - Hold the throttle lever about 3/4
down. 4 - Push the green button..... and IGNITE!!!!
|
  
|
|
| |
|
| Look at them Gooo!!!! Every PowerSki
Dealer and Distributor and some of
their family members got to Ignite
the PowerSki Jetboard™ Igniter 330™.
By that afternoon, the stories began to flow on who was the
better rider and who was out there ripping it. To see First
Time Riders with smiles on there faces says
it all. |
|